Recap To Store A Performance; Save Edit To A Different Performance (Or Create A New One); Performance Name; How To Restore The Factory Performance Settings - Generalmusic WK1000 Owner's Manual

Arranger keyboard

Hide thumbs

Table Of Contents

Table of Contents

owners manual

Press and hold the STORE PERFORMANCE button

Press ENTER to conﬁ rm the display request [?]

Selecting a Style with th SINGLE TOUCH PLAY function ON, the original Performance (set by Generalmusic)

is recalled. You can modify and store it in one of the 63 programmable Performance available locations.

SAVE EDIT TO A DIFFERENT PERFORMANCE (OR CREATE A NEW ONE)

Plese follow these instructions if you wish to save the Performance to a new memory location,

Press and hold the STORE PERFORMANCE key

for a second

Use the TEMPO/DATA key to move to the lo-

cation that will contain the Performance. The

Performance number will be shown in the dis-

play (e.g.: P 11)

Press ENTER. The Performance is saved to the

new location

To change the Performance name, proceed as follows.

Keep the STORE PERF. buttons pressed for a

few seconds

Use the symbol located below the keyboard

to write the new name.

Conﬁ rm with ENTER the Performance saving.

HOW TO RESTORE THE FACTORY PERFORMANCE SETTINGS

The INIT (refer to the "MIDI/GENERAL") function cancels all modiﬁ cations applied to the Performances and

restoring the original settings from the ROM memory.

Press and hold the MIDI/GENERAL button for

or a few seconds

Scroll to the INIT page e with the PAGE but-

tons

Select with the TEMPO/ DATA buttons the

parts you wish restore.

Press ENTER to conﬁ rm deletion

sounds and performances