Table of Contents
Advertisement
owners manual
A Sound is assigned to each Performance track.
THE REAL TIME KEYBOARD SECTIONS (UPPER 1, UPPER2, LOWER)
The display constantly shows which tracks are assigned to the accompaniment and which ones are assigned to the
keyboard section (this does not happen only when a special mode is selected, where the deactivation of the tracks is
required). The sections that can be played in Real Time are : Upper 1, Upper 2 and Lower; they correspond respectively
to tracks 7, 8 and 9.
SOUNDS AND KEYBOARD MODES
The keyboard sounds can be combined in different confi gurations, by using
the LOWER, UPPER 1 and UPPER 2 (keyboard section) keys, located to the
right of the display. A LED placed next to each of them shows their ON or
OFF status. It is possible to set the keyboard to FULL or SPLIT modes. By se-
lecting one of them, the keyboard will work in two different ways.
FULL MODE
In FULL Mode, you can play over the entire extension of the keyboard, either using a single Sound or two layered
Sounds. If you wish to play in Full mode, just turn off the LOWER section by hitting the LOWER key (the led will go out)
as well as the ARRANGE ON/OFF key. By doing this, the UPPER 1 and UPPER 2 sections, whether single or layered, will
be assigned to the entire range of the keyboard (make sure that ARRANGE ON/OFF is turned off). In this mode, when
you play with Styles (and the ARRANGE ON/OFF led is ON), the automatic accompaniment will recognize the current
SPLIT point and will assign the part of the keyboard to the left of the Split to the LOWER section. If the LOWER section
is turned off, the part of the keyboard to the left of the Split point will be silent. The UPPER 1 and UPPER 2 sections can
be activated or deactivated, according to your requirements.
SPLIT MODE
The SPLIT divide the keyboard into two separate sections, so that two differ-
ent Sounds can be used at the same time: one Sound will be assigned to the
section of the keyboard on the left of the Split point (LOWER) and the other
one to the section on the right (UPPER 1 and/or UPPER 2). When playing in
Real Time you can switch to Split mode by simply turning the LOWER section
on (the LED is on): to do this, press the LOWER key located to the right of
the display. In this way the keyboard will be divided into two sections, one
to the left and one to the right of the Split point, as standard mode for the
instrument. To recap, the possible situations are as follows:
ARRANGE ON/OFF is off (the accompaniment is off)
A
Only UPPER 1 on: the Sound from track 9 play over the entire keyboard
range
Only UPPER 2 on: the Sound from track 8 play over the entire keyboard
B
range
UPPER 1 and 2 both on: the Sound 8 and 9 are layered over the entire
C
keyboard
UPPER 1 and LOWER both on: the Sound from track 7 left of the split
D
and Sound from track 9 on the right
UPPER 2 and LOWER both on: Sound from track 7 left of the split and
E
Sound from track 8 on the right
All on: Sound from track 7 left of the split, and Sounds from tracks 8
F
and 9 layered on the right
Turning ARRANGE ON/OFF to on (the accompaniment is on) automatically sets to Split Mode and divides the key-
board at the Split point. In this case if LOWER section is not active, the left part of the keyboard will not play. On the
contrary, the Sound from track 7 is associated to this section. The function of the other two sections is identical.
Page14
SOUNDS & PERFORMANCES
wk2000 se
Enables the
sound assigned
to the UPPER1
section
Enables the
sound assigned
to the UPPER2
section
Sounds&Performances
Hide quick links:
Advertisement
Table of Contents
