The User Style Performance; How To Program A User Style Performance; To Assign A Name To A User Style; To Record Program Change - Generalmusic WK1000 Owner's Manual

Arranger keyboard

Hide thumbs

Table Of Contents

Table of Contents

owners manual

All empty User Styles contain a default Performance. The default performance has

the following sounds assigned to the accompaniment tracks (see the table).

HOW TO PROGRAM A USER STYLE PERFORMANCE

It is NOT possible to recall a Style User Performance with the PERFORMANCE RECALL button, as it happens

with Performances in RealTime, Song/Style and Song modes. Each User Style is associated to a single User

Style Performance which is stored in the current Style User location only and not in other locations.

A User Style Performance can be programmed in Style User Record mode only. Follow the instructions given

in the Performance chapter to modify the sounds and the values of the tracks. Make sure that the track name

appears above the Program change number (press the corresponding Function key twice). Once you have

programmed the User Style Performance, press and hold the PERF STORE key for one second. Press ENTER

to conﬁ rm. The modiﬁ cations are directly stored in the User Style location. Follow the recording procedure

as described.

A proper name can be assigned to each USER style

IMPORTANT: enter the RECORD MODE to assign a name to the Style. Press the PAGE button to select the Performance

Name page.

Select a USER STYLE and press the REC button to switch to RECORD MODE

Press the PAGE button to select the PERFORMANCE NAME page

the alpha-numeric function is set automatically. You can now enter the

User Style name, using the keyboard keys

Press and hold the PERF STORE button. Press ENTER to conﬁ rm

The USER STYLE name is now saved.

You may decide to change a Sound during the recording. In that case the Sequencer will record the cor-

responding Program Change number to the relative track. When playing the Style back , the track (or the

tracks) containing the Sound that has been changed, will play the ﬁ rst cycle of the Riff with the original

Sound and will change to the second Sound exactly as recorded, that is, the second Sound will be included

from the second cycle and all the subsequent ones. It will not be possible therefore to listen to the original

sound, unless the Style is stopped and restarted. To avoid this condition, it is advisable to record a Program

Change to the original Sound again, just before the end of the ﬁ rst cycle of the Riff. In this way, all the suc-

cessive cycles of the Riff will start with the ﬁ rst Sound selected. The best results are obtained when modify-

ing Riffs that are 4 bars long or more.

All controls generated by hardware devices (Pitch bend, Modulation), or by the optional pedals connected

to wk1000 rear-panel sockets can be recorded to the relative track. To record Volume section messages,

use the optional Volume Pedal, that can be programmed in the Volume section in the General Menu.

Page50