Split Mode - Generalmusic WK1000 Owner's Manual

owners manual
The SPLIT mode divide the keyboard into two separate sections using two different Sounds at the same
time: one Sound will be assigned to the left side of the Split point (LOWER) and the other one to the section
on the right (UPPER 1 e/o UPPER 2). Playing in Real Time you can switch to Split mode by simply turning the
LOWER section on (the LED is on): to do this, press the LOWER key located to the right of the display.
To recap, the possible situations are as follows:
ARRANGE ON/OFF = OFF (the accompaniment is off)
A UPPER 1 ON only : Sound from track 9 over the entire keyboard range
UPPER 2 ON only : Sound from track 8 over the entire keyboard range
B
UPPER 1 and 2 both ON: Sound 8 and 9 are layered over the entire keyboard
C
UPPER 1 and LOWER both on: Sound from track 7 left of the split and Sound from track 9 on
D
the right
UPPER 2 and LOWER both on: Sound from track 7 left of the split and Sound from track 8 on
E
the right
All section on (UPPER1+UPPER2+LOWER) : Sound from track 7 left of the split, and Sounds
F
from tracks 8 and 9 layered on the right.
ARRANGE ON/OFF = ON (the accompaniment is enabled)
Enabling the ARRANGE (ON/OFF to ON) automatically sets to SPLIT MODE dividing the keyboard at
the Split point. In this case if LOWER section is not active, the left part of the keyboard will not play.
On the contrary, the Sound from track 7 is associated to this section. The function of the other two
sections is identical.
sounds and performances

SPLIT MODE

DEFAULT SPLIT POINT: B3
LOWER HALOPAD
UPPER 1 - PIANO
wk1000
Section enabled LED ON
UPPER 1 UPPER 1
UPPER 2
UPPER 2
LOWER LOWER
Disabled LED OFF
Enabled LED ON
Page19