Table Of Contents; Connection - Doro 870 Manual

Connection .............................1
The display..............................2
Base unit indicator .................2
Battery . ....................................3
Coverage ................................3
Making a call . ..........................3
Receiving a call ......................3
Volume control .......................3
Turning the handset Off/On ..3
Redialling ................................3
Mute button . ............................3
Temporary silent mode .........4

Connection

1. Connect mains adapter and phone cable to respective wall sockets.
2. Insert the batteries(AAA 1.2V NiMH) in the handset
with plus and minus terminals as directed.
3. Charge the handset with the keypad facing outwards (for 24 hours the first time).
4. Select language/date by following the instructions below.
Language
5. Press ☼ to illuminate the display.
6. Press Menu.
7. Scroll to Setting with the scroll button (☼/
8. Scroll to Handset Set with the scroll button (☼/
9. Scroll to Language with the scroll button (☼/
10. Scroll to required setting with the scroll button (☼/
11. Hold down
L
Date/Time
12. Press Menu. Scroll to Date/Time with the scroll button (☼/
13. Scroll to Date/Timewith the scroll button (☼/
14. Set date (DD.MM.YY). Press OK.
15. Enter time of day (HH MM). Press OK.
16. Hold down
L
New Zealand Purchasers
Before use please change the Recall (R) button timing to setting 600ms as described on page 12. This will ensure
correct operation of additional network services such as "Call Waiting".
In order for the 0/00 prefix to be included when receiving a caller-id number the NZ CID mode must be set to
on. The telephone will add the required prefix in accordance with current Telecom NZ guidelines. If a charge for
local calls is unacceptable the NZ CID mode should not be activated.
1. Press *. Scroll to Caller list. Press OK.
2. Select NZ Caller-ID. Press OK.
3. Select On. Press OK. Hold down
Key lock . ..................................4
Speaker/Group listening .......4
Paging .....................................4
Phonebook .............................4
Incoming numbers (caller ID) 6
SMS messages .....................7
Network services ...................9
Date/Time/Alarm....................9
Other settings .........................10
Cordless Baby Monitor..........10
Country Code . ........................11
Register . ..................................11
to return to standby.
to return to standby.
L
English
). Press OK.
b
). Press OK.
b
). Press OK.
b
). Press OK.
b
). Press OK.
b
to return to standby.

Signals and display . ...............11
System settings . .....................12
Call barring..............................13
Net. Provider . ..........................13
Expanded system (+1)...........14
Specific absorption rate
(SAR) . ......................................14
Declaration of conformity . .....14
UK . ...........................................14
Troubleshooting .....................15
Guarantee . ..............................15
). Press OK.
b