Call Barring; Net. Provider - Doro 870 Manual

Call barring

The telephone can block certain types of outgoing calls.
System PIN is 0000 on delivery.
1. Access Call Barring according to description on previous page.
2. Scroll to selected handset. Press OK.
3. Scroll to Barring Mode. Press OK.
4. Scroll to required setting. Press OK.
INT call
Barred no.
Setting barred numbers
Enter the sequence of digits for the type of call to be barred. Example: select 00 to block
international calls. Three different bars of up to eight digits each may be used.
1. Access Call Barring according to description on previous page.
2. Scroll to selected handset. Press OK.
3. Scroll to Barring Number. Press OK.
4. Scroll to selected entry. Press OK.
5. Enter required digits (max 8). Press OK.
6. Activate the Barred no. setting according to description on top of page.

Net. Provider

To choose a certain service provider, one would usually dial a prefix code before the actual
phone number.
This function will automatically select the telephone network provider, e.g.:
Provider X (prefix 9301) for dialling international calls. Set up the LCR so that all phone
numbers starting with 00 will be changed to 930100. System PIN is 0000 on delivery.
1. Access Net. Provider according to description on previous page.
2. Scroll to the required preselection. Press OK.
3. Enter sequence to be sensed/exchanged (up to 5 digits, e.g. 00).
4. Scroll to <Number>. Enter sequence to be added (up to 10 digits, e.g. 930100).
5. Scroll to required setting Off/ On. Press OK.
Please note!
To place your call with a certain network provider, you must be a registered subscriber.
The display always shows the entered number (not the number actually being dialled).
You can have up to four Net Provider options simultaneously.
If the number sensing option is not selected, the digits will be added to every call.
Only allows internal calls. Blocks all outgoing calls.
Blocks the numbers you select, see below.
English