Table of Contents
Advertisement
English
The Answering Machine
Playback of Messages
The
indicator will flash when there are new ICM messages.
5
1. Press and release
2. After each ICM the day & time the message was received will be announced,
followed by a short beep.
3. If two short beeps are heard there are no further new ICM's, and the
machine will return to standby mode.
4. If you wish to playback all ICM's (old then new) press and release
NOTE!
All ICM's will be saved (unless erased during playback, see below) new ICM's will be recorded
after the old ones.
The following functions are available during playback:
Button
Function
Repeat or hold down until you hear a beep, in order to step
< <
through the messages backwards.
Skip to next message.
> >
Stop playback.
!
Erase current message.
C
/
v
V
Increase or decrease the ICM playback volume.
a
a
Pause during ICM playback (max. 7 seconds). Press
continue.
Delete Messages (ICM's)
Delete Individual ICM's
If you want to delete a single ICM, press
playing.
Delete All ICM's
It is only possible to delete all ICM's simultaneously after playback:
Press and hold
Please note that new ICM's cannot be deleted until they have been played.
8
. New ICM playback will begin.
until you hear a long beep.
C
while that particular message is
C
again.
again to
www.doro.com
Advertisement
Table of Contents
