Sms Messages - Doro th50 Manual

SMS messages

This applies only to subscribers of text messaging services (SMS).
This service is not yet available in all countries. Maximum 160 signs per message.
A new SMS message is indicated with the text New SMS and the symbol
The memory can store up to 20 messages.
Please note!
Program the correct number for your operator, see next page.
In most cases you must subscribe to the SMS service as well as the caller ID service supplied by your service
provider for message reception to function.
Information about the functions you can use varies depending on the service provider. It is not certain that all
service providers can send/receive SMS with all types of equipment.
With certain service providers you can send an SMS even to people without SMS equipment. In those cases
the message is read by an automated voice.
Failed SMS are saved in the outbox.
There are also templates for frequently used texts.
Read new SMS/inbox
1. Press Menu. Scroll to SMS. Press OK.
2. Scroll to Inbox. Press OK.
3. Scroll to selected entry. Press Read.
4. Read your message. Press Option.
5. Scroll to the required selection:
6. Press OK and follow the instructions in the display.
Write new SMS message
1. Press Menu. Scroll to SMS. Press OK.
2. Scroll to Write new SMS. Press OK.
3. Press corresponding digit key one or more times for the desired text.
..................................... [Space]
1
..................................... Switch between upper/lower case letters
#
4. Press Option. Scroll forward to send or store the message. Press OK.
5. Enter the telephone number including the area code, or press Option to retrieve the
telephone number from the phonebook.
6. Press Send.
7. The display shows if the SMS has been sent successfully or not. If no error report is
shown, the message has been sent successfully.
English

.
ABC/abc/Abc