Incoming Messages (Icm); The Following Functions Are Available During Playback; Delete Incoming Messages - Doro 916i cr User Manual

Incoming messages (ICM)
The red indicator
5
Playback will always begin with any new messages, for example if there are three old messages
and two new ones, only the two new ones will be played back, then the answer machine will
return to standby mode.
Press the play button once again to listen to all messages, starting with the oldest messages.
/
1.
Press to start playback.
9 ||
PRIVACY MODE
With
. The TAM will then play the incoming message(s).
Q
2 .
After each message a short beep will be heard.
3 .
When playback is finished you will hear a short beep, and the machine will return to
standby mode. All incoming messages are saved (unless you have erased any during
playback, see below), new messages will then be recorded after the old ones.
The following functions are available during playback
Button Function
88
Repeat the current message, or press
m���ag�� .
99
Skip to next message.
/  Stop playback.
1
C
Era�� m���ag�� .
/ Increase or decrease the speaker volume.
{ }
/
Pause during playback (max. 7 seconds). Press
||
9
playback.
Delete Incoming Messages
If you want to delete a single incoming message press
To erase all messages after playback, press and hold
Please note!
New messages cannot be deleted until they have been played.
PRIVACY MODE
With
.
Q
flashes to show that new messages have been received.
activated you need to enter the
activated you need to enter the
English
PIN CODE
twice to step back through the
88
while the message is playing.
C
until unit beeps.
C
PIN CODE
13
(0000) and then press
/
again to resume
||
9
(0000) and then press