Table of Contents
Advertisement
English
The Answering Machine
Playback of messages
The red indicator flashes to show that new messages have been received.
Playback will always begin with any new messages, for example if there are three
old messages and two new ones, only the two new ones will be played back,
then the answering machine will return to standby mode.
Press the play button once again to listen to all messages, starting with the
oldest messages.
1. Press
to start playback.
9
2. After each message a short beep will be heard.
3. When playback is finished you will hear two short beeps, and the machine
will return to standby mode. All incoming messages are saved (unless you
have erased any during playback, see below), new messages will then be
recorded after the old ones.
The following functions are available during playback:
Button
8 8
9 9
C
/
{
}
9 ||
Delete Incoming Messages
If you want to delete a single incoming message press C while the message is
playing.
To erase all messages after playback, press and hold C until unit beeps.
Please note that new messages cannot be deleted until they have been played.
0
Function
Function
Repeat the current message, or hold down until you hear a beep
to step back through the messages.
Skip to next message.
Stop playback.
Erase messages.
Increase or decrease the speaker volume.
Pause during playback (max. 7 seconds). Press
resume playback.
again to
9 ||
www.doro.com
Advertisement
Table of Contents
