Oven Lighting; Oven Door - Electrolux EH K10-4 User Manual

2. Rotate the fat trap to the left from the
oven roof (see illustration).
3. Wash the fat trap in hot water with
washing-up liquid and a soft brush or
simply wash in the dishwasher. With
stubborn dirt, soak for a while in hot wa-
ter with soap suds.
4. Reassembly in reverse order. Make sure
the heating element has a good fit in the
connecting socket when inserting.

Oven Lighting

Warning: Risk of electric shock! Prior to
1
changing the oven light bulb:
– Switch off the oven!
– Disconnect from the electricity supply.
Place a cloth on the oven floor to protect
3
the oven light and glass cover.
Changing the oven light bulb/cleaning
the glass cover
1. Remove the glass cover by turning it
anti-clockwise and then clean it.
2. If necessary: replace with
25 watt, 230 V, 300 °C heat-resistant
oven lighting.
3. Refit the glass cover.
Removing the heating elements.
You can remove the top and bottom heating
elements to clean the oven cavity. In this
case proceed as follows for possible clean-
ing actions:
Ensure that the oven has cooled down
1
sufficiently so that you can touch heat-
ing elements safely! There is a risk of
burns!
1. Hold the heat element with two hands at
the front.
2. Pull the heating element out of the plug
connection to the front.t
3. Reassembly in reverse order. Make
sure the heating element has a good
fit in the connecting socket when in-
serting.

Oven door

For easier cleaning of the oven interior the
oven door of your appliance can be taken off
its hinges.
electrolux 17