Oven Lighting - Electrolux EH L40-4 User Manual

26 electrolux
To re-insert, first hook the rail into place at
the back (1) and then insert the front and
press into place (2).
Fat trap
The fat trap is almost maintenance free.
However, certain residues may occur due to
the frequent preparation of very fatty foods.
In this case proceed as follows for possible
cleaning actions:
Important: On the heating elements of
the oven roof, there is a risk of burns!
Ensure that the oven has cooled down
sufficiently so that you can touch heat-
ing elements safely
1. Pull the top heating elements out of the
plug connection to the front (see illustra-
tion).
2. Rotate the fat trap to the left from the
oven roof (see illustration).
3. Wash the fat trap in hot water with
washing-up liquid and a soft brush or
simply wash in the dishwasher. With
stubborn dirt, soak for a while in hot wa-
ter with soap suds.
4. Reassembly in reverse order. Make sure
the heating element has a good fit in the
connecting socket when inserting.

Oven Lighting

Warning: Risk of electric shock! Prior to
changing the oven light bulb:
– Switch off the oven!
– Disconnect from the electricity supply.
Place a cloth on the oven floor to protect
the oven light and glass cover.
Changing the oven light bulb/cleaning
the glass cover
1. Remove the glass cover by turning it
anti-clockwise and then clean it.