Changing Bulbs - Ducati MONSTER 1100 S Owner's Manual

Changing bulbs

Before replacing a burnt-out bulb, make sure that the new
one matches the voltage and wattage specifications in
the "Electrical System" paragraph on page 109.
Important
For bulb replacements, contact a Ducati Authorized
Service Centre.
(fig. 95)
Turn signals
Loosen the bolt (1) and detach the lens (2) from the turn
signal support.
The bulb has a bayonet-type end fitting: to remove it, push it
in and turn it counter-clockwise. Push in the new bulb and
turn it clockwise until it clicks into place. Refit the lens by
inserting the tab (A) in the corresponding slot in the turn
signal support.
Refit and tighten the bolt (1).
2
1
fig. 95
89
E