Ducati MONSTER 1100 S Owner's Manual page 34

DDA data acquistion
This function serves to activate the DDA (Ducati Data Analyzer):
E
the DDA must be connected to the motorcycle wiring.
To activate the DDA, go into the menu and set the "DDA"
to "On" by pressing switch (1, fig. 9) in position B "▼" for
3 seconds.
START and STOP the lap separator by pressing the high
beam FLASH button (11, fig. 5) on the left-hand handlebar
MENU
switch.
If the DDA function is active and the display is suddenly
switched off (Key-Off), the function is switched off
automatically.
Press B (for 3 secs.)
Press B (for 3 secs.)
fig. 25
33