Download  Print this page

Advertisement

DTC (Ducati Traction Control) setting function
E
Warning
This function is only available on the 1198S version.
This function serves to set the intervention level for the ECU
of the DTC (Ducati Traction Control).
To set the Traction Control intervention level, with the
motorcycle stationary, enter the "Setup DTC" menu page.
This page only appears in the menu once the Traction
Control ECU has been activated (DTC ON).
The Traction Control intervention level setting (L.1.......L.8)
is indicated on the right-hand side of the display; the
intervention levels range from "1" to "8"; the higher the
number, the greater the intervention of the Traction
Control system (see following paragraph).
Within this menu page, press switch (1, fig. 10) in position B
"▼" for 3 seconds to access the level setting function.
page 1: the display will show "Setup LEV. 1".
If you wish to set this level, press switch (1, fig. 10) in
position B "▼" for 3 seconds; the instrument panel will
automatically quit this page and return to the initial display,
with the level setting indicated on the right-hand side.
If instead you wish to set the next highest level, press
switch (1, fig. 10) in position B "▼".
34
Only if
active
B = On for 3 secs.
A
B
B
B
B = ON
for 3 secs.
A
B = ON
for 3 secs.
A
B = ON
for 3 secs.
fig. 27

Advertisement

Table of Contents

This manual is also suitable for:

Superbike 1198s

Comments to this Manuals

Symbols: 0
Latest comments: