Rear brake pedal
Push down on the pedal (1) with your foot to operate the rear
The system is controlled hydraulically.
The gear change pedal is at rest when in centre position N,
and automatically returns to the centre position. When in this
position, light N (3, fig. 4) on instrument panel comes on.
The pedal can be moved:
downwards = push down on the pedal to engage 1
and to shift down. At this point the N light on the instrument
panel will go off;
upwards= lift the pedal to engage 2
Each time you move the pedal you engage the next gear, one
gear at a time.
gear and then 3