Ducati MONSTER 695 Use And Maintenance Manual page 54

(fig. 49)
Turn signals
Loosen the screw (1) and detach the lens (2) from the turn
signal.
The bulb has a bayonet-type base: to remove it, push it in and
turn it counter-clockwise. Push in the new bulb and turn it
clockwise until it clicks into place. Refit the lens by inserting
the tab (A) in the corresponding slot in the turn signal.
Refit and tighten screw (1).
E
(fig. 50)
Brake light
To change the brake light bulb, loosen the two screws (1)
securing the lens (2) and remove it. The bulb has a bayonet-
type base: to remove it, push it in and turn it counter-
clockwise. Push in the new bulb and turn it clockwise
until it clicks into place. Refit the lens.
Number plate light
To access the bulb in the number plate light (3), pull the
bulb holder out from the light, then pull the bulb out of the
holder and renew it.
54
(fig. 50)
A
2
1
2
3
1
fig. 49
fig. 50