Table of Contents
Advertisement
End of cooking programmer
This device (Fig. 4) allows you to make the
oven switch off automatically once the preset
time is over. An acousitic signal will be heard
when the cooking is completed.The cooking
duration can be set up to 90 minutes
maximum.
Place food in the oven and turn the oven
function control knob and the thermostat
control knob on the required settings. Turn
the timer knob to maximum time position
("90"), then turn it back to set the required
cooking time. When the cooking time is over,
Fig. 4
an acoustic alarm will sound and the oven
will switch off automatically.
Turn the timer knob on
to set the oven on
manual operation.
Oven thermostat control light
This light goes off when the oven heats up
to the temperature set and comes on again
every time the thermostat cuts in to stabilize
temperature.
Operating control light
It indicates that one or more of the heating
elements are turned on.
Safety thermostat
In order to avoid excessive overheating due
to incorrect use of the appliance or else to a
faulty component, the oven is equipped with
a safety thermostat which cuts off the power
supply if necessary. Operation is restored
automatically when the oven temperature
decreases to normal values. Therefore, if the
thermostat cuts in because you have not
been using the appliance correctly, the oven
can be used again simply by waiting for the
appliance to cool down. If, instead, the
thermostat cuts in because of a faulty
component, you should call the Service
Department.
21
Hide quick links:
Advertisement
Table of Contents
