PLANET VIP-110/VIP-210 Web Configuration Guide
Port
RJ-45
RJ-45
RJ-11
Reset Button
There is a push button located behind a small hole next to the PWR LED. This button allows you
to reset VIP or force VIP to enter firmware upgrade mode.
Reset
Push a small, stiff object into the hole until the SYSTEM LED stops blinking, then release the
button.
Label
LAN
Connecting VIP to a 10/100 Mbps Ethernet
network
WAN
Connecting VIP to a 10/100 Mbps Ethernet
network / xDSL /Cable modem for Internet
access
Telephony
Connect PBX Extension line/Telephone to VIP
for voice communication
Function
- 8 -