Installation And Connection; For The Installer - Bosch HSE720120 Instruction Manual

Installation and connection

Electrical connection

For the installer

Safety precautions
If the oven door seal is very dirty, the door will no
longer close properly during operation. The fronts of
adjacent units will become damaged with time. Keep
the seal clean.
The appliance must be connected to the mains by a
licensed expert. The regulations of your electricity
supplier must be observed.
Any damage arising from the appliance being
connected incorrectly will invalidate the guarantee.
An all pole isolating switch must be present on the
installation side with a contact gap of at least 3 mm.
This is not necessary if the appliance is connected by
a plug that is accessible to the user.
Appliances with plugs must only be connected to
properly installed earthed sockets.
Electrical safety: The cooker corresponds to safety
class I and may only be used in conjunction with a
safety earth terminal.
A type H 05 VV F or equal rated lead must be used to
connect the appliance.
9