Replacing The Bobbin Case; Replacing The Light Bulb - Husqvarna Viking Emerald 122 User Manual

1
2
3
d
c
(1)
b
a
c
(2)

Replacing the Bobbin Case

Turn off the power switch.
1
Insert the bobbin case into the hook
assembly area.
2 Make sure the knob of the bobbin
case ts next to the stopper in the
assembly area.
a Knob
b Stopper
3 Insert the bobbin. Replace the
needle plate, inserting the two needle
plate guide pins into the holes in the
needle plate. Replace the screw.
c Guide holes
d Screw

Replacing the Light Bulb

Turn off the power switch. Wait
for the light bulb to cool down before
touching it.
Remove the cap and screw. Remove the
face plate.
(1) Emerald 116 (max 15W)
To remove: Push and twist to the left.
To replace: Push and twist to the right.
(2) Emerald 118 and 122 (12V, 5W)
To remove: Draw out slowly.
To replace: Push in.
41