Replacing The Bobbin Case; Replacing The Light Bulb - Husqvarna Viking Tribute 140M User Manual

REPLACING THE BOBBIN CASE

Turn off the power switch.
1. Insert the bobbin case into the hook
assembly area.
2. Make sure the knob of the bobbin
case ts next to the stopper in the
assembly area.
a. Knob
b. Stopper
3. Insert the bobbin. Replace the
needle plate, inserting the two needle
plate guide pins into the holes in the
needle plate. Replace the screw.
c. Guide holes
d. Screw

REPLACING THE LIGHT BULB

Turn off the power switch. Wait for the
light bulb to cool down before touching it.
Remove the cap and screw. Remove the
face plate.
To remove: Draw out slowly.
To replace: Push in.
Note: Replace bulb with same type rated
12 Volt, 5 Watt.
42 – Care and Maintenance
1
2
3
d
c
b
a
c