Teac LPU190 User Manual page 22

Connecting to the Computer via USB
To start recording with Audacity, make sure your computer is connected to the unit via USB
as described below.
1.
To connect the turntable to your computer, plug one end of the USB cable into the
USB port on the unit and the other end to a USB port on your computer.
2.
Turn on the unit from Standby Mode.
3.
Choose the corresponding recording source using the FUNCTION button as below:
Recording from PHONO: Press the FUNCTION button repeatedly to select the
PHONO function, then place the record onto the platter and select the appropriate
speed.
Recording from TUNER: Press the FUNCTION button repeatedly to select TUNER
and press the STOP/BAND button to select FM or AM (if desired), then tune into the
desired station. If the reception is poor, recording quality may be affected.
Recording from USB: Press the FUNCTION button repeatedly to select USB.
Recording from CARD: Press the FUNCTION button repeatedly to select CARD.
 NOTE: If you wish to listen while downloading to your computer, turn on the VOLUME
knob and adjust to your desired volume level. However, the playback volume level on the
unit doesn't affect the downloading volume level.
19