Usb Audio Playback; Sd/Mms/Mc Card Audio Playback; Playback Controls; Program Mode (Set Up A Playlist) - Teac LPU190 User Manual

USB Audio Playback

1.
Press the FUNCTION button repeatedly to select the USB function.
2.
Insert an external audio source (i.e. MP3 player) into the USB slot. The display will
show 'USB' and soon turn into 'READING'. Note: If the USB device is not detected,
'NO USB' will appear on the display.
3.
Normally tracks will be played automatically.
4.
Press the PLAY/PAUSE (  ) button to interrupt/resume the playback.
5.
Stop playback by pressing the STOP (  ) button.
SD/MMC/HCSD Card Audio Playback
1.
Press the FUNCTION button repeatedly to select the CARD function.
2.
Insert a SD/MMC/HCSD card into the CARD slot. The display will show 'CARD' and
soon turn into 'READING'. Note: If the card is not detected, 'NO CARD' will appear
on the display.
3.
Normally, playback will start automatically.
4.
Press the PLAY/PAUSE (  ) button to interrupt/resume the playback.
5.
Stop playback by pressing the STOP (  ) button.
USB/CARD Audio Playback Controls
Play/Pause: Press the PLAY/PAUSE (  ) button to start or pause playback.
Stop: Press the STOP button and playback will be cancelled.
Go to next track: Press the  button to go the start of the next track.
Go to beginning/previous track: Press the  button once to go back to the start of the
current track. Press the  button twice to skip to the previous track.
Playback options: Press the MEMORY/MODE button repeatedly to cycle through the
following options, described below:
REPEAT 1: The current track will be played continuously on repeat.
REPEAT ALBUM: The current folder will be played continuously.
REPEAT ALL: All tracks will be played continuously.
SHUFFLE: Tracks will be played in a random sequence.
INTRO: The first 12 seconds of each track will be played in sequence.
CANCEL: Press MEMORY/MODE button again to cancel playback mode.

Program Mode (Set up a playlist)

Program a customized playlist with specific songs in your chosen sequence.
1.
Press the STOP button if audio playback is ongoing.
2.
Press the MEMORY/MODE button to enter Program Mode. 'F00' will flash on the
screen.
3.
Press  and  to select a folder. Press the MEMORY/MODE button to confirm the
selection. 'T00' will flash to prompt you to select a track.
4.
Press  and  to select a track, then press the MEMORY/MODE button to add the
track into the playlist.
14