Front Panel Overview - Teac LPU190 User Manual

Front Panel Overview

Bu on/Part In USB/CARD Mode
1. PLAY/PAUSE
Press to start playback
or toggle pause.
2. STOP/BAND Press to stop playback.
3. Skip Forward Press to go to the start
of the next track.
4. Skip Back Press once to go back to
the start of the current
track. Press again to go
to previous tracks.
5. STANDBY Press to switch the unit back to Standby Mode.
6. DELETE While playback is
stopped, press and hold
to enter Delete Mode.
7. MEMORY/MODE Press to select playback
modes: Repeat 1,
Repeat Album, Repeat
All, Shuffle, Intro and
Cancel.
8. FUNCTION Press repeatedly to cycle through different functions: PHONO, TUNER, USB
and CARD.
9. BIT/REC Press to start recording
to a connected
USB/CARD device.
In recording mode if both
USB and CARD devices
are connected, use
BIT/REC and
buttons to select
either one.
10. VOLUME Rotate the knob to adjust the volume level.
11. Power Indicator This LED lights up when the unit is powered on.
Displays information about functions, playback or recording.
12. Display
13. Record Indicator This LED lights up when recording is in progress.
14. USB Port Connect your USB device to the USB port for music playback or recording.
15. SD Card Slot Connect your SD/MMC Card into the card slot for music playback or recording.
16. Dust cover Close the dust cover when playing vinyl records to prevent dust from settling onto the record and causing
sound distortions.
In AM/FM TUNER Mode
Press to listen to a
preset radio station.
Press to end recording
to USB/CARD devices.
Press to toggle between
FM and AM frequencies.
Press to adjust the radio
frequency. Press and
hold to auto-search for
the next station.
Press to adjust the radio
frequency. Press and hold
to auto-search for the
previous station.
/
Press to store the
current station as a
preset station.
Press to start recording to a connected USB/CARD
device.
To adjust the recording quality, press and hold
BIT/REC until '128 KBPS' appears on the display,
then select the recording quality using the
buttons.
and
9
In PHONO Mode Standby Mode
/ /
/ /
/ In the
mode, it acts as a
naviga on-right bu on
and/or + bu on.
/ In the
mode, it acts as a
naviga on-le bu on
and/or - bu on.
Press to switch the unit
on.
/ /
/
Hold to
setting function.
/
/
and
/
Displays the clock.
/
se ng
se ng
enter time