Listening To Usb/Card - Teac LPU190 User Manual

LISTENING TO USB/CARD

Connecting USB/CARD Devices
When a compatible USB or CARD memory device is connected to the unit, you can play
compatible audio files from the device or record audio to the device.
 NOTE:
This unit supports USB/CARD memory devices up to 16GB and formatted in FAT32.

The maximum supported number of files and folders are 99 respectively. They are
shown on the unit's display as F01-F99 and T01-T99.
Some USB/CARD drives may not be supported for recording or playback because

they are not formatted in a compatible file system.
It may take some time for the unit to read the USB/CARD storage devices depending

on the data capacity.
The unit cannot play music files directly from your PC. The music files (MP3 and

WMA formats) must be stored on a portable memory device, such as a SD/MMC
CARD, and inserted into the unit's USB or CARD slot.
USB FLASH DEVICE:
Connect your USB flash device securely to the USB port on the front of the unit.
CARD:
Insert your card into the card slot with the label facing upwards, shown below. Press it in
until it clicks.
Insert SD card correctly
CARD MAINTENANCE:
If the card becomes dirty, wipe the surface with a soft, dry cloth.

Cards should be returned to their cases after use to avoid dust.

Do not expose the card to direct sunlight or high humidity and temperature for extended

periods.
CAUTION
It may take some time for the unit to read the USB/CARD storage devices

depending on their capacity, especially in Recording Mode. Please wait
patiently until 'REC' appears on the display.
In Recording Mode, if both USB and CARD devices are connected to the

unit, switch between either one by pressing the BIT/REC button and
selecting USB or Card with the  and  buttons. Press the BIT/REC button
again to confirm and start recording.
IMPORTANT: Switch to another function before you remove your

USB/CARD device to avoid all risks of damaging the data storage system.
Wrong direction
13