Teac LP-R500 Quick-Start Recording Manual

Z
This Guide provides you with the simplest way to use this equipment for recording.
Of course, we strongly suggest that you consult the Owner's Manual for complete details and important safety information.
From Record
4
Set the INPUT switch to "PHONO".
5
Place the record on the turntable
and select the speed.
Before using the turntable
• Completely loosen the transportation
screw by turning them clockwise
with a coin.
• Before use, detach the stylus guard
(white plastic cover) by pulling it
straight off the front of the
cartridge.
• Gently push the clamper to the
right to release the tone arm.
1
Press the POWER
switch to turn the
unit on.
CEC6P12015520
LP-R500 Quick-Start Recording Guide
6
Press the RECORD button.
The red indicator on the RECORD button
blinks.
The unit enters record pause mode.
"REC" indicator blinks and the J
indicator lights on the display.
The recording does not start in this
step. To start recording, make sure
to press the PLAY/PAUSE button
(G/J) in step
• To adjust the recording level, turn the
REC LEVEL knob. See page 26 of
Owner's manual for detail.
2
If the PHONO/TAPE indicator does
not appear in the display, press the
PHONO/TAPE/AUX button repeatedly
to select PHONO/TAPE.
.
8
8
Press the PLAY/PAUSE button
(G/J) to start recording.
When the rotation of the turntable
stops,
automatically.
To prevent unwanted noise from the
tone arm being recorded, stop the
recording manually by using the STOP
button (H).
3
Load a recordable CD-R or CD-RW
disc into the unit.
Make sure "NO TOC" and "CD-R" (or
"CD-RW") indicators lights on the
display, or the RECORD button in step
will not work.
7
Gently lower the tone arm
onto the edge of the record
(or the track to be recorded).
The turntable will begin to
turn.
the recording will
TEAC CORPORATION 0209 . MA-1459A
stop
6