Setting The Panel Lock Function - Tascam CD-9010 Owner's Manual

3 – Preparations

Setting the panel lock function

The unit can be set so that it can only be operated using a
TASCAM RC-9010/RC-9010S remote control (sold separately).
1. Press the MENU button to open the
2. Open the menu screen.
REMOTE
3. Select .
OPERATION PANEL
4. Press the DATA dial to move the cursor (selected area)
right to select the setting.
Turn the DATA dial to set whether or not you can use the
5.
front panel controls to control the unit.
•
: The unit can be controlled using a TASCAM RC-
CD+RC
9010/RC-9010S remote control (sold separately) and
the unit's front panel buttons.
•
(default value): When a TASCAM RC-9010/RC-
RC ONLY
9010S remote control (sold separately) is connected,
the unit's front panel buttons (other than the OPEN/
CLOSE button) are disabled.
6. After completing the setting, press the HOME button to
return to the Home Screen.
NOTE
•
When a remote is not connected, even when this item is set
to RC ONLY, the panel controls will not lock.
•
To unlock the panel, press the MENU button, while pressing
and holding the HOME button. When the "OPERATION PA
NEL Change to CD+RC?" pop-up message appears, select
"Yes" to unlock the panel.
•
You can also lock the panel controls by pressing the MENU
button while pressing and holding the HOME button. When
the pop-up message appears, select "Yes".
•
The panel lock function setting is stored even when the
power is turned OFF.
16
TASCAM CD-9010
screen.
MENU