Table of Contents
Advertisement
Home Screen
The following information is shown on the display of the unit.
Home Screen with audio CD
Home Screen with data CD
Playback level meters
1
These show the playback level.
Depending to the
menu
SYSTEM
one level bar will be shown and the indicator on the left end
will change from
to
,
LR
3M
6M
on page 30.)
Even when set to
, if a mono WAV file is played back, the
ST
display will change to
and a single level bar will be shown.
M
If you switch the
menu
SYSTEM
, the display will change to a VU-type meter display. (See
PEAK
"Setting the level meter display type" on page 31.)
Index
2
This shows the currently playing or selected index number
(audio CD only).
Track time display (main area)
3
This shows the time of the current track.
The contents depend on the playback media.
Media
Contents shown
Audio CD
Minutes, seconds, frames
Data CD
Hours, minutes, seconds, frames
Pressing the TIME DISPLAY button switches between
elapsed time display and remaining time display.
A "
" appears before the remaining time when shown.
-
When an EOM tally signal is being output, the "
"EOM functions" on page 22)
item setting, only
MON MIX
,
, or
. (See "Mono mix setting"
L
R
item to
from
METER TYPE
VU
" blinks. (See
:
2 – Names and Functions of Parts
Playback mode
4
Shows the current playback mode.
Indicator
CONTINUE
SINGLE
PROGRAM
Track number
5
Shows the current track number.
Track playback position
6
Shows the current playback position as a bar. As playback
proceeds, the bar extends from the left.
Repeat playback function indicator
7
This shows the ON/OFF status of the repeat playback
function.
Indicator
No indicator
REPEAT
REPEAT A-
REPEAT A-B
NOTE
The A-B repeat playback function will only be displayed if
selected using a TASCAM RC-9010/RC-9010S remote controller
(sold separately).
PITCH indicator
8
The
indicator appears if the pitch control function
PITCH ON
is on.
Master clock indicator
9
This shows the current master clock.
Indicator
INT
EXT
EXT NO CLK
EXT UNLOCK
(blinking)
EXT
44.1K
48K
Information area
0
CD-TEXT will be shown if available.
File names will be shown when using data CDs.
When the playback mode is set to
the next program item is shown.
Track time display (sub area)
q
The time of the current track is shown. When the main
display area shows the elapsed time, this shows the
remaining time, and vice versa.
A "
" appears before the remaining time when shown.
-
Meaning
Continuous playback mode
Single playback mode
Program playback mode
Meaning
Repeat playback function is OFF
Repeat playback function is ON
A-B repeat playback function starting
point set
A-B repeat playback function is ON
Meaning
Unit's internal clock in use
Synchronized with the word clock
input through the WORD SYNC IN
connector
No signal input through the WORD
SYNC IN connector
WORD SYNC IN connector input
signal unlocked
Synchronization with word clock
input through the WORD SYNC IN
connector possible (after playback
completes, the unit will automatically
resynchronize with the word clock)
Master clock frequency is 44.1 kHz
Master clock frequency is 48 kHz
, information for
PROGRAM
TASCAM CD-9010
11
Advertisement
Table of Contents
