Planet FPS-1011 User Manual page 71

Your PC's MAC Address is the one entitled Physical Address
(00-00-E2-82-C3-AD).
Q3 : This product is not found even after searching by the "Server Manager".
A:
Check if the power adapter and the network cable are connected to the
GDI Print Server properly.
Check if the LAN and ACT LEDs are turned on.
Q5: The ways to change the IP Address of the GDI Print Server.
A:
A DHCP Server is installed in the network
If a DHCP Server is installed, you can setup to let the GDI Print Server
get IP Address from the DHCP Server automatically.
1. Open "Server Manager" and then select "TCP/IP" setting.
2. Select "Auto IP" and click "Save".
3. Reboot the GDI Print Server.
Set up the IP Address Manually
1. Open "Server Manager" and then select "TCP/IP" setting.
2. Select "Static IP" and enter the IP Address and Subnet Mask as your
computer. Click "Save".
3. Reboot the GDI Print Server.
Set a static IP Address to GDI Print Server is recommended
since DHCP assignment may dramatically change the IP
Note
Address for GDI Print Server.
71