Printer - Planet FPS-1011 User Manual

Device Name: The device name is not configurable. By default, it is the last
6-digit of the MAC ID of the print server with prefix "PS".
GDI Print Server Name: The print server name is the same as device name
by default. You can change this name to identify the print server easily when
you are searching for the print server by the supplied utilities.
Model Type: Display the type of the print server.
Firmware Version: Display the firmware version of the GDI Print Server.
MAC Address: The MAC ID of the GDI Print Server will be displayed here
USB Port Number: Display the number of the USB port on the GDI print
server.
LPT Port Number: Display the number of the parallel port on the GDI print
server.
RAW/IPP/LPR Printing: By default, the RAW/IPP/LPR printing protocols are
all enabled.

7.3.2 Printer

This page lists the information and the status of the printer connected to the
GDI Print Server USB port. The printer information includes manufacturer,
model number and the supported printing language. The status of the printer
include "Ready", "Off Line" or "Paper Out".
Ready: The printer is ready to use.
Off Line: The printer is not connected to GDI Print Server through USB cable or
it is turned off.
Paper Out: The printer is not ready because of paper out.
39