System Configuration - Planet FPS-1011 User Manual

server or manually specify static IP.
IP Address Assignment:
Click the "IP" button to enter the IP setting page. If you need the GDI Print
Server to automatically get an IP from DHCP server, select "Auto IP". You can
also select "Static IP" to manually assign "IP Address", "Subnet Mask" and
"Gateway" for the GDI Print Server. By default, "Static IP" is enabled and the
default settings are as follows.
IP Address: 192.168.0.1
Subnet Mask: 255.255.255.0
Auto IP – The IP Address information of the GDI Print Server obtained from
DHCP Server will be displayed in the address field.
Static IP – Manually assign the IP address information in the same network
with your computer to the GDI Print Server.
6.7

System Configuration

Double Click "System" icon and the System configuration window will pop-up.
In the System configuration page, you can see all available printing protocols
and upgrade the new firmware for this GDI Print Server.
Upgrade Firmware: You can use this "Upgrade Firmware" tool to update the
newest firmware of the GDI Print Server. Click "
correct firmware in your PC. After selecting the firmware file, click the
"Upgrade" button to finish the firmware update process.
Before you upgrade the firmware, please make sure that the IP
Address settings of the GDI Print Server are in the same
Note
network as your computer.
Load Default: If you want to reset the GDI Print Server to default factory
settings, please click "Load Default".
" button and select the
37