Tcp/Ip; Save Settings - Planet FPS-1011 User Manual

Password: Enter new password of the GDI Print Server. The password can be
up to 7-digit alphanumeric format.
Re-type Password: enter the same password for the GDI Print Server again.

7.4.2 TCP/IP

You can configure the GDI Print Server to automatically get IP from DHCP
server or manually specify static IP.
If you need the GDI Print Server to automatically get an IP from DHCP server,
select "Enable Obtain TCP/IP Settings Automatically (Use DHCP/ BOOTP)". You
also can select "Disable Use the following TCP/IP Settings" to manually assign
"IP Address", "Subnet Mask" and "Gateway" for the GDI Print Server.

7.4.3 Save Settings

After configuring the GDI Print Server, you have to click the "Save Settings" to
save the settings and restart the system.
41