System Tools; Load Default; Upgrade Firmware From Browser - Planet FPS-1011 User Manual

7.5

System Tools

7.5.1 Load Default

You can use this page to restore the factory default settings. Click "OK" and
after the print server is restarted, the process is completed. Be aware that all of
your previous setup will be cleared.

7.5.2 Upgrade Firmware from Browser

You can upgrade new firmware for this GDI Print Server in this page. Click
"Browse" to select the new firmware in your storage and then click "OK", the
firmware will be updated in several minutes.
Be aware that if you have started upgrading firmware, you have to follow all the
upgrading steps or the GDI Print Server can't turn back to normal configuration.
42