Macintosh (AppleTalk) For other environments, or any problems, please refer to the full User’s Manual in the CD-ROM. Package Content 1 x FPS-3300 1 x Quick Installation Guide 1 x Drivers and User’s Manual CD 1 x Power Adapter Physical Installation 1.
Print Server Setup In the following situation, you do not need to configure the Print Server. Just follow the procedures in below section to share your printer. Windows users: Already installed TCP/IP protocol. Apple Macintosh users: Already installed AppleTalk protocol.
Utility Installation >> Windows Peer-to-Peer Printing Install Peer-To-Peer Print Driver 1. Insert Drivers and User’s Manual CD into the CD-ROM drive to initiate the autorun program. Once completed a menu screen will appear. 2. Click on “Install Utility” hyper link to initiate the installation. Or you can click the “Start”...
Page 6
3. In Select A Print Server screen, please select the print server and its port number that your printer connected and click “Next”. If you can not find your printserver in the list, please press “Refresh” button to scan you network again. 4.
Page 7
5. In the Select A Printer screen, please select the printer that is connected on the print server port which you selected in step 4 from the list, click “Next”. 6. Please check the information of Summary screen. click “Next” to continue.
7. Please click “Finish” to complete the print server installation. >> Macintosh (AppleTalk) 1. Click the Apple icon and then Control Panel - Network. 2. Ensure that EtherTalk is selected under AppleTalk Connection. 3. Click Chooser. The Chooser panel will open. 4.