Network Port Setup; Add Printer - Planet FPS-1011 User Manual

5. Network Port Setup

"Network Port Setup" Utility offers a very simple method to add or remove GDI
Print Server's printer port from the client's computer.
During the GDI Print Server's installation procedure, the "Setup Wizard" will
automatically add the printer port of the GDI Print Server you have selected to
user's computer (see below).
If you have just installed another new GDI Print Server in the network, you can
run "Setup Wizard" or run this program. This program will search for new GDI
Print Servers and allow you to add the new network printer port into your
computer conveniently. Perform the standard Add Printer procedure then you
can print directly to the printer through the newly installed GDI Print Server.
Select the network ports in the "Available Ports" list and click ">" to add ports.
If you want to add all available ports, please click ">>". To cancel some of the
network ports or all ports from the "Chosen Ports" list, please click "<" or "<<".
Please be aware that Network Port Setup Utility can only
detect and configure all GDI Print Servers within the same
network; it cannot search and configure the GDI Print Servers
Note
on other subnets across network segments.
5.1

Add Printer

After adding a "Network Port" of the GDI Print Server to your computer, you can
follow the procedure described below to add printer to the Windows.
Click "Start", choose "Settings" and select "Printers and Faxes".
1.
Click "Add a Printer".
2.
The "Add Printer Wizard" is displayed. Click "Next".
3.
27