Planet FPS-1011 User Manual page 13

Set the "Alias Name" to the Print Server here. Click on "Next".
10.
Please set the network settings for the Print Server manually. By default, the
11.
network settings are as follow.
IP Address: 192.168.0.1
Subnet Mask: 255.255.255.0
If you have selected "DHCP", the Print Server will try to determine the
network settings automatically. If a DHCP Server is present within the
network, the Print Server will automatically obtain and configure the network
settings assigned by the DHCP Server. The assigned IP Address will be
shown in the IP Address fields. If no DHCP Server is present within the
network, please assign the network settings of the Print Server manually.
Please click "Next" once you have found appropriate network settings for the
Print Server.
The Print Server IP Address must be set to the same network
segment within your network environment or connected
computer. If the network IP address settings are incorrect,
Note
then print server will not be able to communicate throughout
the network.
13