TracVision R6DX User's Guide
Chapter 5 - Troubleshooting
System Status Lights
VOLTAGE Light
40
Three status lights on the front of the interface box indicate the current
status of the system and can help you identify problems (see
Figure 19).
Figure 19 System Status Lights
Status Lights
During normal operation, all three status lights should be lit green.
The following tables explain what the different light conditions
indicate.
The table below explains what the VOLTAGE light indicates.
Light is...
Indicates
Off
Off
Green
OK
Green,
Cable Open
flashing
Orange
Low Power
Red,
Bad Power
flashing
Description
Interface box is off (power switch is
off) or no power input
Good power (10-16 VDC at interface
box)
Open detected in antenna cable
(check the antenna coax connection)
Low power (9-10 VDC) at interface
box)
Insufficient power (less than 9 VDC
or more than 16 VDC input)