KVH Industries TracVision R6 DX User Manual page 11

DISH Network Configuration
If you purchased the DISH Network
configuration, a DISH HD receiver is
provided with your system.* No additional
components are necessary! You can receive
both high-definition (HD) and standard-
definition programming from three DISH
network satellites: 119, 110, and either 61 or
129 (choose the third satellite for your
particular region - see
antenna will automatically switch between these three satellites as
necessary as you change channels using the primary receiver's remote.
* The DISH HD receiver is shipped separately and requires activation of
DISH Network service through KVH's Activation Department.
DIRECTV Configuration
You can receive DIRECTV programming from the
101 and 119 satellites without any special
equipment. All you need is a DIRECTV receiver. The
antenna will automatically switch between these
two satellites as necessary as you change channels
using the primary receiver's remote.
The antenna system also supports the optional KVH Tri-Sat
AutoSwitch for receiving the limited Ku-band portion of DIRECTV
HDTV programming available on the 101, 110, and 119 satellites. Visit
www.kvh.com/hdtv
ExpressVu Configuration
Other than a satellite TV receiver, no additional
components are needed to receive both high-
definition (HD) and standard-definition
programming from ExpressVu's 91 and 82
satellites. The antenna will automatically switch between these
satellites as necessary as you change channels using the receiver's
remote.
"DISH Network Setup" on page
for details.
TracVision R6DX User's Guide
Chapter 1 - Introduction
N E T W O R K
27). The
7