Introduction; Assembly; Batteries - C-SCOPE CS6PI Instructions Manual

INTRODUCTION

To protect your investment complete both sections of the enclosed guarantee card and return the
reply paid portion to C-Scope (UK only). This is particularly important in order to obtain the
free second year parts guarantee. Please retain the original packing box. In the event that your
detector should ever require to be serviced, this package will be most suitable for postal
protection.
C-Scope detectors are recognised as the finest detectors available. They are designed with lasting
quality, high technology, and above all, value for money. The only way to realise this value is to
carefully study and understand this instruction manual. You will then be able to obtain all the
advantages designed into your detector. It is also strongly recommended that you experiment
with the detector's operation in air using various test samples, in order to learn to identify and
understand the detector's capabilities and responses. Always remember that becoming a good
metal detectorist is like becoming a good photographer or fisherman, that is, although it is an
advantage to buy the best equipment, having bought it, patience and hours of practice are needed
to become proficient.

ASSEMBLY

Open the carton and remove the main housing assembly. Twist the plastic stem lock located at
the end of the upper stem to allow the lower stem to be inserted. Adjust for length and rotate the
lower stem to wrap the cable around the stems to take up any slack. Turn the stem lock to fix it at
the desired position.

BATTERIES

The CS6Pi is powered by eight AA batteries (not supplied) available from garages, department
stores, etc. or a single 12v rechargeable pack from C-Scope. It is advisable to use standard
batteries to start with. You can then evaluate the sort of use you give the detector and decide
whether the investment in rechargeables is justified.
Battery
Compartment
The batteries should be fitted in the holder which is located in the battery compartment. To fit
new batteries first check the THRESHOLD control on the unit is switched to OFF. Then loosen
4
CHARGER
SOCKET
HEADPHONE
SOCKET
BATTERY
COMPARTMENT