d.
Disconnect the display panel cable (2) from the display panel and remove the panel (3).
5.
If it is necessary to replace the webcamera/microphone module:
a.
Disconnect the webcamera/microphone module cable (1) from the webcamera/microphone
module. (The webcamera/microphone module cable is part of the display panel cable.)
b.
Detach the webcamera/microphone module (2) from the display enclosure.
6.
If it is necessary to replace the hinges:
a.
Remove the four Phillips M2.5×4.0 screws (1) and (2) that secure the hinges to
the display enclosure.
b.
Remove the display hinge covers (2).
Component replacement procedures
95