d.
Memory module (see
e.
Keyboard (see
f.
Top cover (see
g.
Hard drive (see
h.
System board (see
Remove the display assembly:
1.
Remove the three Phillips M2.5×6.5 screws (1) and (2) that secure the display assembly to
the base enclosure.
2.
Remove the display assembly (3).
3.
If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.
Remove the two display bezel screw covers (1) and the two Phillips M2.5×5.0 screws (2)
that secure the display bezel to the display assembly. The display bezel screw covers are
included in the display bezel spare part kit, spare part number 676644-001, and in all
display assembly subcomponent spare part kits.
b.
Flex the inside edges of the bottom edge (3), the left and right sides (4),
and the top edge (5) of the display bezel until the bezel disengages from
the display enclosure.
Memory module on page
Keyboard on page
54).
Top cover on page
59).
Hard drive on page
63).
System board on page
44).
73).
Component replacement procedures
93