Network Printing On Tabs Using The Pcl Print Drivers - Xerox D110 User Manual

Network printing on tabs using the PCL print drivers

1. Load the tab stock in Tray 3, Tray 4, or Tray 5 (Bypass). Refer to Loading Tab Paper
in Trays in the Paper and Other Media chapter.
2. From your computer, open the document you want to print.
3. Select File > Print.
4. Select the desired printer.
5. Ensure that Auto-Rotate and Center and Choose Paper Source by PDF page size
are unchecked.
Note
These options may not be available with your version of Adobe Acrobat or Adobe
Reader.
6. Select Properties and select the Paper/Output tab.
7. Click the Paper Select button.
8. If Tray 3 or Tray 4 is being used for the tab stock, then select Paper Settings for Auto
Tray and choose Tab Stock for the paper type.
9. If Tray 5 (Bypass) is being used for the tab stock, then select Tray 5 (Bypass) Settings
and choose Tab Stock for the paper type.
10. Select OK twice to return to the Properties screen.
11. Select the Advanced tab and select the Tab Margin Shift item.
12. From the Tab Margin Shift pull-down menu, select the Shift Tab option.
13. Set the desired Tab margin Shift.
14. Select OK to save and close the Tab Margin Shift window.
15. Select OK to save and close the Properties window.
16. Select the desired copies/quantity and OK to print the job.
Note
For additional information, review your print driver documentation.
Xerox ® D110/D125/D136 Printer
User Guide
Computer operations
6-3