Table of Contents
Advertisement
Selecting the SCENE templates
Creating your original SCENE
templates
You can create your original SCENE templates for each
SCENE button. You can refer to the preset 17 SCENE
templates to create the original SCENE templates.
Select the desired SCENE
template
SCENE template library
(Image)
1
Turn on the video monitor connected to this
unit.
2
Set the operation mode selector to
and then press and hold the desired
SCENE button for 3 seconds.
The SCENE template customizing screen appears on
the video monitor.
SCENE1
.p
DVD Viewing
INPUT:
MODE:
NIGHT:
[ENTER]:Rename
[SCENE1]:SET
[RETURN]:STATUS
Note
When the SCENE template you want to customize is not
assigned to any of the
repeatedly to recall the desired SCENE template on the
menu screen.
36
En
Create an original SCENE
template
1
Assign the SCENE
template to the
SCENE button
AMP
[
DVD
STRAIGHT
SYSTEM
l / h
SCENE buttons, press
3
k / n to select the desired parameter
Press
of the SCENE template and then
select the desired value of the selected
parameter.
You can adjust the following parameters for a SCENE
template:
• INPUT:
The input source component.
• MODE:
The active sound field programs,
STRAIGHT or Pure Direct mode.
• NIGHT:
The night listening mode (see page 49).
SYSTEM: Keeps the current night listening
mode.
CINEMA: Sets the night listening mode to the
CINEMA mode.
MUSIC:
Sets the night listening mode to the
MUSIC mode.
4
Press the
SCENE button again to confirm
the edit.
y
An asterisk mark (*) appears by the name of the original SCENE
template.
Notes
• Once the desired SCENE templates are assigned to the
corresponding
SCENE buttons, you need to set the input
source of the SCENE template on the remote control. See
page 82 for details.
• You can create a customized SCENE template for each SCENE
button, and if you create another customized SCENE template,
this unit overwrites the old customized SCENE template with
the new one.
• The newly created template is only available for the assigned
SCENE button.
■ Rename the SCENE templates
Select the name of the SCENE template at step 3
of "Creating your original SCENE templates" and
then press
ENTER.
• Press
k / n to select the desired character.
l / h to place an "_" (underscore) under the
• Press
space or the desired character.
• Press
RETURN to cancel the new name.
• Press
ENTER to confirm the new name.
l / h to
Advertisement
Table of Contents
