Table of Contents
Advertisement
9
l / h repeatedly to toggle between
Press
the setup result displays.
Results of the speaker
connection and wiring
Results of the speaker
distance from the
listening position
Results of the setting of
each speaker size
Results of the parametric
equalizer of each speaker
Results of the speaker
output level
y
If you are not satisfied with the results or want to manually
adjust each parameter, run "MANUAL SETUP" (see
page 67).
Notes
• The distances displayed in the "DISTANCE" results may
be longer than the actual distance depending on the
characteristics of your subwoofer.
• In the "EQ" results, different values may be set for the
same frequency to provide finer adjustments.
Optimizing the speaker setting for your listening room
10
Press
to return to the top
"AUTO:RESULT" display.
AUTO:RESULT
. RESULT
SP
DIST: 4.50/5.30m
LVL : -9.0/+6.5dB
>
SET
[ ]/[ ]:Up/Down
[ENTER]:Enter
11
Make sure the pointer is pointing at "SET"
and "CANCEL" and then press
select "SET" or "CANCEL".
AUTO:RESULT
RESULT
SP
DIST: 4.50/5.30m
LVL : -9.0/+6.5dB
.
SET
>
[ ]/[ ]:Up/Down
[ENTER]:Enter
Choices: SET, CANCEL
• Select "SET" to confirm the "AUTO SETUP"
results.
• Select "CANCEL" to cancel the "AUTO SETUP"
results.
12
Press
to confirm your selection.
The top "SET MENU" display appears in the OSD.
SET MENU
. ;AUTO SETUP
;MANUAL SETUP
.A;SIGNAL INFO
[ ]/[ ]:Up/Down
[ENTER]:Enter
13
Press
MENU".
14
Disconnect the optimizer microphone from
this unit.
The optimizer microphone is sensitive to heat. Keep it
away from direct sunlight and do not place it on top
of this unit.
y
If you change speakers, speaker positions, or the layout of
your listening environment, run "AUTO SETUP" again to
recalibrate your system.
:
3/4/0.1
CANCEL
l / h to
:
3/4/0.1
CANCEL
to exit from "SET
31
En
Advertisement
Table of Contents
