Creating Your Original Scene Templates - Yamaha RX-V461 Owner's Manual

Creating your original SCENE
templates
You can create your original SCENE templates for each
SCENE button. You can refer to the preset 15 SCENE
templates to create the original SCENE templates.
Customizing the preset SCENE
templates
Use this feature to customize the preset SCENE templates.
Select a SCENE template
SCENE template library
(Image)
1
Turn on the video monitor connected to this
unit.
Press and hold the desired E SCENE button
2
for 3 seconds and then press D AMP.
The SCENE template customizing screen appears on
the video monitor.
1
3 seconds
Note
When the SCENE template you want to customize is not
assigned to any of the E SCENE button, press G l / h
repeatedly to recall the desired SCENE template on the
menu screen.
Create the original SCENE
template
1
Assign to the SCENE
button
AMP
3
Press G k / n to select the desired parameter
of the SCENE template and then G l / h to
select the desired value of the selected
parameter.
You can adjust the following parameters for a SCENE
template:
• INPUT: The input source component
• MODE:
The active sound field programs,
STRAIGHT or DIRECT STEREO
mode (see pages 34 and 38)
• NIGHT: The night listening mode setting (see
page 35)
− SYSTEM: Keeps the current night listening
mode.
− CINEMA: Sets the night listening mode to the
CINEMA mode.
− MUSIC:
Sets the night listening mode to the
MUSIC mode.
Press the E SCENE button again to confirm
4
the edit.
y
An asterisk mark (*) appears by the name of the original SCENE
template.
Notes
• Once the desired SCENE templates are assigned to the
corresponding E SCENE buttons, you may need to set the
input source of the SCENE template on the remote control. See
page 59 for details.
• You can create a customized SCENE template for each
E SCENE button, and if you create another customized
SCENE template, this unit overwrites the old customized
SCENE template with the new one.
• The newly created template is only available for the assigned
E SCENE button.
Renaming the SCENE templates
Select "SCENE" in step 3 of "Customizing the
preset SCENE templates" and then press
G ENTER.
• Press G k / n to select the desired character.
• Press G l / h to place "_" (underscore) under the
space or the desired character.
• Press H RETURN to cancel the new name.
• Press G ENTER to confirm the new name.
Selecting the SCENE templates
1
31
En