Yamaha RX-V661 Owner's Manual page 75

■ Speaker distance
Use this feature to manually adjust the distance of each
speaker and the delay applied to the respective channel.
Ideally, each speaker should be the same distance from the
main listening position. However, this is not possible in
most home situations. Thus, a certain amount of delay
must be applied to the sound from each speaker so that all
sounds will arrive at the listening position at the same
time.
SOUND MENU
C)SP DISTANCE
. UNIT;;;;;;meters
FRONT L;;;3.00 m
FRONT R;;;3.00 m
CENTER;;;;3.00 m
SWFR;;;;;;3.00 m
[ ]/[ ]:Up/Down
p [
[ ]/[ ]:Adjust
Unit UNIT
Choices: meters (m), feet (ft)
Initial setting:
[U.S.A. and Canada models]: feet (ft)
[Other models]: meters (m)
• Select "meters" to adjust speaker distances in meters.
• Select "feet" to adjust speaker distances in feet.
Speaker distances
Control range: 0.30 to 24.00 m (1.0 to 80.0 ft)
Control step: 0.10 m (0.5 ft)
Initial setting:
FRONT L/FRONT R/CENTER/SWFR/SUR. L/SUR. R/
PRNS L/PRNS R: 3.00 m (10.0 ft)
SB L/SB R: 2.10 m (7.0 ft)
SP DISTANCE
FRONT L Front left speaker
FRONT R Front right speaker
CENTER
Center speaker
SWFR Subwoofer
SUR. L Surround left speaker
SUR. R Surround right speaker
SB L Surround back left speaker
SB R Surround back right speaker
PRNS L Presence left speaker
PRNS R Presence right speaker
Notes
• The available speaker channels differ depending on the setting
of the speakers.
• Instead of "SB L" and "SB R", "SB" is displayed if "SUR. B L/
R SP" is set to either "SMLx1" or "LRGx1" (see page 71).
C)SP DISTANCE
1/2
Adjusted speaker
Customizing this unit (MANUAL SETUP)
■ Equalizer
D)EQUALIZER
Use this feature to select the parametric equalizer or the
graphic equalizer.
Equalizer type select EQ TYPE SELECT
Use this feature to select the type of equalizer.
Choices: AUTO PEQ, CENTER GEQ, EQ OFF
SOUND MENU
D)EQUALIZER
EQ TYPE SELECT
. CENTER GEQ
[ ]/[ ]:CT GEQ
p [
[ ]/[ ]:Select
• Select "AUTO PEQ" to use the parametric equalizer
adjusted in "AUTO SETUP" (see page 28).
• Select "CENTER GEQ" to adjust the built-in
5-frequency band graphic equalizer so that the tonal
quality of the center speaker matches that of the front
left and right speakers. Press
graphic equalizer screen.
• Select "EQ OFF" to deactivate the equalizing feature.
Note
When you carry out "AUTO SETUP" in advance (see page 28),
"AUTO PEQ" is automatically selected as the default setting.
Test tone TEST
SOUND MENU
. TEST >OFF
- ______ +
100Hz ;;;;;;
300Hz ;;;;;;
1kHz ;;;;;;
3kHz ;;;;;;
10kHz ;;;;;;
[ ]/[ ]:Up/Down
p [
[ ]/[ ]:Adjust
Use this feature to make adjustments for "CENTER GEQ"
while listening to a test tone.
Choices: OFF, ON
• Select "OFF" to stop test tones and output the currently
selected source component.
• Select "ON" to output test tones from the center and
front left speakers.
k / n to display the
ON
0dB
0dB
0dB
0dB
0dB
73
En