Selecting Audio Input Jacks (Audio Select); Displaying The Current Status Of This Unit On A Video Monitor - Yamaha RX-V661 Owner's Manual

Hide thumbs Also See for RX-V661:
Table of Contents

Advertisement

Selecting audio input jacks
(AUDIO SELECT)
This unit comes with a variety of input jacks. Use this
feature (audio input jack select) to switch between input
jacks when more than one input jack is assigned to as the
same input source.
y
• We recommend setting the audio input jack select to "AUTO"
in most cases.
• You can adjust the default audio input jack select of this unit by
using "AUDIO SELECT" in "OPTION MENU" (see page 80).
Press H AUDIO SELECT (or
repeatedly to select the desired audio input jack
select setting.
Available input sources
VCR
DVR
V-AUX
A.SEL: AUTO
Currently selected audio input jack select setting
AUTO
Automatically selects input signals in the
following order: (1) HDMI (2) Digital
signals (3) Analog signals
HDMI
Selects only HDMI signals. When HDMI
signals are not input, no sound is output.
COAX/OPT
Automatically selects input signals in the
following order: (1) Digital signals input
at the COAXIAL jack. (2) Digital signals
input at the OPTICAL jack. When no
signals are input, no sound is output.
ANALOG
Selects only analog signals. If no analog
signals are input, no sound is output.
Note
This feature is not available when no digital input jacks
(OPTICAL, COAXIAL and HDMI) are assigned. Use "I/O
ASSIGNMENT" in "INPUT MENU" to reassign the respective
input jack (see page 76).
AUDIO)
DTV/CBL
DVD
MD/CD-R
TUNER
CD
PHONO
Displaying the current status of
this unit on a video monitor
You can display the operating information of this unit on a
video monitor.
1
Turn on the video monitor connected to this
unit.
2
Set the operation mode selector to
and then press
DISPLAY on the remote
control.
The current status screen appears in the OSD.
STATUS
MOVIE
Sci-Fi
INPUT:
A.SEL:
NIGHT: OFF
y
You can select the amount of time that the current status is
displayed in the OSD by using the "OSD-AMP" parameter
in "OPTION MENU" (see page 79).
Note
The OSD signal is not output at the VIDEO output jacks
and will not be recorded.
Playback
AMP
VOL:-40.0dB
DVD
HDMI
39
En

Advertisement

Table of Contents
loading

Table of Contents