Radio Data System Tuning (Europe Model Only); Displaying The Radio Data System Information - Yamaha RX-V661 Owner's Manual

Radio Data System is a data transmission system used by FM stations in many countries. This unit can receive various
Radio Data System data such as PS (program service), PTY (program type), RT (radio text), CT (clock time), and EON
(enhanced other networks) when receiving Radio Data System broadcasting stations.
Displaying the Radio Data System
information
Use this feature to display the 4 types of the Radio Data
System information: PS (program service), PTY (program
type), RT (radio text) and CT (clock time). The
corresponding indicators light up in the front panel
display.
Notes
• You can select one of the Radio Data System display modes
only when the corresponding Radio Data System indicator
lights up in the front panel display. It may take a while for this
unit to receive all of the Radio Data System data from the
station.
• You can select only the available Radio Data System display
modes being offered by the station.
• If the signals being received are not strong enough, this unit
may not be able to utilize the Radio Data System data. In
particular, the "RT" mode requires a large amount of data and
may not be available even when the other Radio Data System
display modes are available.
• In case of poor reception conditions, press 7 TUNING AUTO/
MAN'L on the front panel so that the AUTO indicator
disappears from the front panel display.
• If the signal strength is weakened by external interference while
this unit is receiving the Radio Data System data, the reception
may be cut off unexpectedly and "...WAIT" appears in the front
panel display.
• When the "RT" mode is selected, this unit can display the
program information by a maximum of 64 alphanumeric
characters, including the umlaut symbol. Unavailable characters
are displayed with the "_" (underscore).
• If the reception is cut off when the "CT" mode is selected, "CT
WAIT" appears in the front panel display.
Radio Data System tuning
(Europe model only)
1
2

RADIO DATA SYSTEM TUNING (EUROPE MODEL ONLY)

Tune into the desired Radio Data System
broadcasting station.
• We recommend using the automatic preset tuning
to tune into the Radio Data System broadcasting
stations (see page 51).
• You can also use PTY SEEK mode to tune into the
desired Radio Data System broadcasting station
from the preset ones.
Press FREQ/TEXT on the remote control
repeatedly to select the desired Radio Data
System display mode.
PS PTY
Frequency display
• Select "PS" to display the name of the Radio Data
System program currently being received.
• Select "PTY" to display the type of the Radio Data
System program currently being received.
• Select "RT" to display the information on the
Radio Data System program currently being
received.
• Select "CT" to display the current time.
RT CT
53
En