Setting The Display Illumination Colour - Blaupunkt BREMEN MP76 Operating And Installation Manual

Display
Setting the display illumination
colour
When setting the display illumination, you
can choose one of four preset colours or
you can mix a colour yourself from the RGB
spectrum (red-green-blue) or you can se-
lect a colour during a colour scan.
Selecting a preset colour
Four different colours are already stored in
the device. "Ocean" (blue), "Amber", "Sun-
set" (red-orange) and "Nature" (green) are
available. Select a colour that best suits
your vehicle interior.
Press the MENU button 9.
u
u Press the softkey 5 with the display
label "DISPLAY".
u Press the softkey 5 with the display
label "COLOR".
u Press the softkey 5 with the display
label of the desired colour.
u Press the OK joystick 8 or the MENU
button 9 to exit the menu.
The settings are saved.
Mixing a colour for the display
illumination
To customise the display illumination to suit
your taste, you can mix a colour yourself
using the three primary colours red, green
and blue.
u Press the MENU button 9.
u Press the softkey 5 with the display
label "DISPLAY".
Press the softkey 5 with the display
u
label "COLOR".
14
u Press the softkey 5 with the display
label "USER".
u
The following menu allows you to defi ne
the components of the three colours
red, green and blue. For this purpose,
repeatedly press the corresponding
softkey 5 until the colour displayed
corresponds to your taste.
u Press the OK joystick 8 or the MENU
button 9 to exit the menu.
The settings are saved.
Selecting a display illumination colour
during a colour scan
Press the MENU button 9.
u
Press the softkey 5 with the display
u
label "DISPLAY".
u Press the softkey 5 with the display
label "COLOR".
Press the softkey 5 with the display
u
label "COL-SCAN".
The device starts changing the display illu-
mination colour.
u
If you want to select one of the colours,
press the softkey 5 with the display
label "SAVE".
u
If you want to return to the previous
menu without changing the colour,
press the softkey with the display label
"BREAK".
u Press the OK joystick 8 or the MENU
button 9 to exit the menu.
The settings are saved.